UXP-TXS

Standalone Single-Channel HDMI AV Transmitter

Key Features

  • One HDMI input (HDMI type A)
  • Resolution up to 3840x2160p @ 30 Hz
  • RS-232/RS-422 support for serial communication/control
  • Fanless device passively cooled by convection air flow
  • 802.3at Type 2 PoE+ support
  • Auto-discovery and simplified provisioning features
  • Ultra low latency transport over 1GbE links
  • Third-party control support

Download the UXP-TXS datasheet

Standalone AV Transmitter

The UXP-TXS AV transmitter is a no-nonsense, cost-effective, single-channel HDMI video and audio transmit gateway. It is a compact and quiet standalone device that dissipates heat by convection air flow with the use of a heatsink and can be installed in various in room locations, including behind monitors, and under desks, lecterns, and floor boxes. Reduce decision making at design time by simply adding up and ordering the number of transmitting end points you need in your system.

Live AV Over IP Transport

The UXP-TXS has one HDMI input port supporting resolutions of up to 3840x2160p @ 30Hz and transmits AV content with ultra low latency over its 1GbE links. Additional functionality includes support for 802.3at Type 2 PoE+ as well as RS-232/RS-422 for serial communication and control. Pair the UXP-TXS with EvertzAV's UXP-RXS single-channel HDMI AV receiver for an unbeatable low-cost AV transport solution.

Fully Integrated with the NUCLEUS Platform

The UXP-TXS is a managed element of the NUCLEUS platform which is controlled by the NUCLEUS Session Manager - a full featured centralized management server used for the configuration, control, and orchestration of the UXP AV gateways. Any combination of UXP AV gateways can be interconnected using a COTS (Commercial Off The Shelf) network switch and then configured and managed by the NUCLEUS Session Manager.

No Fuss Setup, No Programming Required

The NUCLEUS platform operates on a simplified configuration framework allowing administrators the ability to set up a fully functional AV distribution network in no time at all without the hassles associated with most AV distribution platforms available on the market today. The process has been streamlined so that a UXP AV gateway can be taken out of the box and be put to use in less than five minutes. Whether big or small, deployments of all sizes are handled the same way, using the same consistent process.

Unparalleled Versatility and Scalability

The NUCLEUS platform is exceedingly scalable and can be integrated into your enterprise using your existing standard IT infrastructure/IP network. NUCLEUS supports 1GbE networks and provides the highest resolutions possible with unbeatable image quality at the lowest latencies. As you grow, NUCLEUS grows with you, without limitation. To connect additional rooms, simply add additional UXP AV gateways.

Product Images

UXP-TXS Front View
UXP-TXS Rear View

Specifications

UXP-TXS
Video Inputs 1 HDMI (type A)
Supported Resolutions Up to 3840x2160p @ 30 Hz
Ethernet Transport 1 fixed 1000BASE-T RJ45 Ethernet Port (IEEE 802.3)
Ethernet Connector RJ45
RS-232/RS-422 M5 DIN connector (Optional M5 to DB9 converter cable available – see Available Accessories)
HDMI Audio Yes
In-Band Control Yes
Control System NUCLEUS Session Manager
Web-Based Configuration Yes
Security Compliance Compliant with applicable DoD Network Devices Security Technical Implementation Guide (STIG)
DC Input Voltage 12VDC (via optional power adapter - see Available Accessories)
Power Supply 802.3at Type 2 PoE+ (provides power to device over Cat6a/Cat7 cable)
(Optional power supply available - see Available Accessories)
Power Consumption 23W
Ambient Operating Temperature 32° to 104° F (0° to 40° C)
Relative Humidity 10% to 90% RH (non-condensing)
Dimensions (H x W x D) 1.75in x 4.13in x 7.43in (44.45mm x 104.90mm x 188mm)
Weight 29.95 oz (849 g)

Ordering Information

UXP-TXS Fanless standalone 1GE transmitter: single HDMI input with PoE+ and RS-232/RS-422 support

Available Accessories

UXP-CBL-DB9MDTE-4P-15 4 pin to DB9 (male) serial cable, 1.5m length
UXP-CBL-DB9-4P-15 4 pin to DB9 (female) serial cable, 1.5m length
UXP-PS-12V5A Power supply (100-240V / 47-63Hz AC input; 12VDC / 5A output)