UXP-TRS4K-2A
Standalone AV Gateway w/ Dante™ Audio
Key Features
- Two HDMI 2.0A inputs and outputs (software defined)
- Resolution up to 4096x2160p @ 60Hz, 4:4:4 color sampling*
- Integrated Dante™ support for up to 32x32 simultaneous Dante audio streams
- Standalone device with integrated fan
- Ultra low latency transport over 1GbE, 2.5GbE, or 10GbE links
- Third-party control support
Standalone AV Gateway
The UXP-TRS4K-2A standalone AV gateway accepts up to two HDMI inputs or provides up to two HDMI outputs (software defined and dependent on network bandwidth) and, along with audio and USB HID, transports them with ultra low latency over its transport links. The UXP-TRS4K-2A is a standalone device which is compact and quiet and can be installed in various in-room locations, including behind monitors, under/inside desks and lecterns, and floor boxes.
Integrated 32x32 Dante Audio Module
In addition to its HDMI, analog, and S/PDIF audio capabilities, the UXP-TRS4K-2A supports Dante audio, facilitating up to 32x32 simultaneous Dante audio streams. This allows for local HDMIembedded or remote IP-ingested audio streams to be routed as Dante audio or vice versa (i.e. Dante audio streams to be routed to the local HDMI output port or transported via IP to remote destinations).
Fully Integrated with the NUCLEUS Platform
The UXP-TRS4K-2A is a managed element of the NUCLEUS platform which is controlled by the NUCLEUS Session Manager - a full featured centralized management server used for the configuration, control, and orchestration of the UXP AV gateways. Any combination of UXP AV gateways can be interconnected using a COTS (Commercial Off The Shelf) network switch and then configured and managed by the NUCLEUS Session Manager.
Easy Setup, No Programming Required
The NUCLEUS platform operates on a simplified configuration framework allowing administrators the ability to set up a fully functional AV distribution network in no time at all without the hassles associated with most AV distribution platforms available on the market today. The process has been streamlined so that a UXP AV gateway can be taken out of the box and be put to use in less than five minutes. Whether big or small, deployments of all sizes are handled the same way, using the same consistent process.
Product Images
Specifications
| UXP-TRS4K-2A | |
|---|---|
| Video Inputs | 2 HDMI 2.0a (software defined and dependent on network bandwidth) 1 HDMI 2.0a Auxiliary to HDMI Input 2 |
| Video Outputs | 2 HDMI 2.0a (software defined and dependent on network bandwidth) |
| Supported Resolutions | Up to 4096x2160p @ 60 Hz (4:4:4 color sampling)* |
| Dante Audio | Supports 32x32 simultaneous Dante audio streams |
| Audio Inputs | 1 stereo balanced analog (terminal header) |
| Audio Input Impedance | High impedance |
| Audio Input Level | Line level (+4dBu) |
| Audio Outputs | 1 stereo balanced analog (terminal header) 2 S/PDIF |
| Audio Output Impedance | 600 Ω |
| Audio Output Level | Line level (+4dBu) |
| USB / HID | 2 HID device ports (type A) 1 HID host port (micro type B) |
| Control Port (Out-of-Band) | 10/100/1000 BASE-T RJ45 Ethernet Port (IEEE 802.3) |
| Transport Port | 2x SFP+ cages. Either can be used for NUCLEUS transport at rates of 1GbE, 2.5GbE or 10GbE (see available accessories) |
| Output Scaling | Yes |
| HDMI Audio | LPCM (up to 8 channels) Passthrough support for Dolby Digital®/AC-3, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTS-HD High Res, DTS-HD Master Audio, DTS:X |
| SNMP Support | Yes |
| In-Band Control | Yes |
| Control System | NUCLEUS Session Manager |
| Third-Party Control Support | Yes |
| Web-Based Configuration | Yes (via NUCLEUS Session Manager) |
| Security Compliance | Compliant with applicable DoD Network Devices Security Technical Implementation Guide (STIG) |
| DC Input Voltage | 12VDC via supplied power adapter |
| Power Supply | 100-240V / 47-63Hz AC input; 12VDC / 5A output |
| Power Consumption | TBD |
| Ambient Operating Temperature | 32° to 104° F (0° to 40° C) |
| Relative Humidity | 10% to 90% RH (non-condensing) |
| Dimensions (H x W x D) | 1.81in x 8.25in x 6.56in (45.97mm x 209.55mm x 166.62mm) |
| Weight | 39.40 oz (1117 g) |
Ordering Information
| UXP-TRS4K-2A | Standalone AV gateway with Dante audio: dual HDMI input or output, analog audio, Ethernet, and USB HID |
|---|
Available Accessories
| UXP-SFP2-1G-T | SFP, 1000 BASE-T RJ45, 100m |
|---|---|
| UXP-SFP-2G5-T | SFP+, 2.5G BASE-T RJ45, 100m |
| UXP-SFP-10G-T | SFP+, 10G BASE-T RJ45, 30m |
| 3405PS-6HO | Six output primary and redundant auto-ranging power supply, 100V – 240V AC at 50/60Hz |
| UXP-RACK-PAF-1 | Panel assembly for rack mounting one UXP-TRS4K-2A gateway in a 19in rack |
| UXP-RACK-PAF-2 | Panel assembly for rack mounting two UXP-TRS4K-2A gateways in a 19in rack |
*4096x2160p @ 60 Hz (4:4:4 color sampling) is the highest resolution supported by the UXP-TRS4K-2A AV gateways and can be achieved only when deployed in a 10GbE network.