Skip to Main Content


Single-Channel HDMI AV Receiver Wall Plate


Single-Channel HDMI AV Receiver Wall Plate

Key Features

  • One HDMI output (HDMI type A)
  • Resolution up to 3840x2160p @ 30Hz
  • RS-232 support for serial communication/control
  • 802.3at Type 2 PoE+ support
  • Auto-discovery and simplified provisioning features
  • Ultra low latency transport over 2.5GbE/1GbE links
  • Third-party control support

Download the UXP-RXS-WP datasheet

HDMI AV Receiver in a Wall Plate

The UXP-RXS-WP AV receiver is a no-nonsense, cost-effective, single-channel HDMI video and audio wall plate receiver. The UXP-RXS-WP has one HDMI output port supporting resolutions of up to 3840x2160p @ 30Hz and receives AV content with ultra low latency over its transport link. Additional functionality includes support for 802.3at Type 2 PoE+ and RS-232 for serial communication and control. Pair the UXP-RXS-WP with EvertzAV's UXP-TXS-WP single-channel HDMI AV transmitter wall plate for an unbeatable low-cost AV transport solution.

Fully Integrated with the NUCLEUS Platform

The UXP-RXS-WP is a managed element of the NUCLEUS platform which is controlled by the NUCLEUS Session Manager - a full featured centralized management server used for the configuration, control, and orchestration of the UXP AV gateways. Any combination of UXP AV gateways can be interconnected using a COTS (Commercial Off The Shelf) network switch and then configured and managed by the NUCLEUS Session Manager.

Easy Setup, No Programming Required

The NUCLEUS platform operates on a simplified configuration framework allowing administrators the ability to set up a fully functional AV distribution network in no time at all without the hassles associated with most AV distribution platforms available on the market today. The process has been streamlined so that a UXP AV gateway can be taken out of the box and be put to use in less than five minutes. Whether big or small, deployments of all sizes are handled the same way, using the same consistent process.

Product Images

UXP-RXS-WP Front View
UXP-RXS-WP Rear View


Video Outputs 1 HDMI (type A)
Supported Resolutions Up to 3840x2160p @ 30 Hz
Ethernet Connector RJ45
Transport Ports 1 2.5GbE/1GbE Multi-Gigabit port
RS-232 2.5mm stereo connector
(Optional 2.5mm stereo to DB9 converter cable available – see Available Accessories)
Output Scaling Yes
HDMI Audio Yes
In-Band Control Yes
Control System NUCLEUS Session Manager
Web-Based Configuration Yes (via NUCLEUS Session Manager)
Security Compliance Compliant with applicable DoD Network Devices Security Technical Implementation Guide (STIG)
Power Supply 802.3at Type 2 PoE+ (provides power to device over Cat6a/Cat7 cable)
Power Consumption 23W
Ambient Operating Temperature 32° to 104° F (0° to 40° C)
Relative Humidity 10% to 90% RH (non-condensing)
Dimensions (H x W x D) 3.58in x 4.24in x 1.60in (91mm × 107.6mm × 40.6mm)
Note: With panel cover included.
Weight 9.98 oz (282.93 g)

Ordering Information

UXP-RXS-WP Single-channel HDMI AV receiver wall plate: single HDMI output with PoE+ and RS-232 support

Available Accessories

UXP-CBL-SR-DB9F-10 2.5mm stereo right angle to DB9 (female) RS-232 serial cable, 1m length
UXP-CBL-SR-DB9M-10 2.5mm stereo right angle to DB9 (male) RS-232 serial cable, 1m length